Trying for a simple efficient gold recovery process?

Let me tell you about mineral processing equipment that is being used with all round the world, by large scale mining operations through to artisanal miners.

It’s an in order to using cyanide.


One of probably the most simple and efficient technologies does Not require the use of dangerous chemicals.

Sure, using a cyanide solution for gold leaching is widespread. It’s the most popular hydrometallurgical process for the extraction of gold from ores and concentrates.

BUT, as Wired magazine from the uk points out.

The waste product from cyanidation is a disgusting and toxic gloop that can seep into rivers or poison groundwater, killing wildlife and rendering landscape sterile and clean. Huge pits of ore can be subjected to cyanide leaching in mines, with the runoff a major environmental hazard that needs a significant cost to render unhazardous.

Instead of that, why not use gravity?


Gravity separation of proper gold has been the working principle in many cost-effective mineral processing plants, all around the world.

That’s in both small-scale and large-scale mineral extraction methods.

For example, arriving for a landing gold shaking table uses a low-capacity vibrating table for gold extraction.


Of course, it’s not just for extracting gold. Mineral extraction any concentrating table works for recovering other precious metals and minerals too, including all heavy minerals, heavy mineral sands, illmenite, rutile, gemstones, platinum, tin, wolfram, tantalite, zircon, topaz and diamonds.

The Wave Table is ideal for cleaning up sluice box concentrates and separating gold from black sands, too. The Wave Table is best for cleaning up concentrates from Knelson, Falcon, Knudsen, STLBs and other centrifugal concentrators. (For large throughputs and capacity mining/processing operations, particularly for gold, we can assist you you with the most frugal Centrifugal Concentrators.)


Larger mines are using Wave Tables to perform final gold clean-ups along with the finishing of gold concentrates. This process eliminates the should certainly use cyanide or mercury.

Gold wave tables are a lot better for the environment, too as for workplace fundamental safety!


When would like to efficiently recover fine gold from gold bearing ore, you need a Centrifugal Concentrator. For example, a 1-3 TPH unit will handle both alluvial and difficult rock components.

In a great mineral processing plant, stores use a Centrifugal Concentrator (known in countries as an STLB) carry out the primary concentration. That is, to get better all the gold and heavy minerals coming from the ore feed.

This recovered material is called the concentrates, or ‘cons’ for simple terms.


But truly get clean gold, you’ve got to then run the cons through another process (a secondary concentrator), for example running the cons over the Wave Table. By doing this, an upgraded fraction is recovered is actually why much smaller in mass, so its easier to deal with.

When concentrates are cleared up on a wave Table, from your farm clean gold ready in order to smelted and turned suitable gold bar for conversion.

All this without using cyanide or mercury.


Another cyanide-free option is chemical leaching.

Gold can be extracted from run of mine ore as well as from concentrates thanks to the Chemical Leaching System, which is a cost effective non-cyanide gold leaching system that can assist you with.

CLS could be used for merely any metal but especially used for the recovery of gold, silver and platinum group other metals.


This incredible gold separation device enters the picture 3 models covering all scales of operation. Despite the name, a gold wave table activly works to extract ANY heavy mineral, where there is a specific gravity (density) differential in between valuable heavy mineral constituent and its gangue or host ingredient. It also cleans grit and gold with the stripped carbon used in CIP/CIL practices.


To quote Ian, a 30-year veteran in the mining and minerals industry, “I have personally had success although Wave Table recovering very fine heavy minerals such as gold, mineral sands, zircon, rutile, illmenite, tantalite, scheelite, stibnite and many others. Because it may be so efficient at recovering very fine particle sizes, more affordable proved excellent as a scavenger on tailings. The Wave Table will readily recover 5 micron gold from tailings. In mineral processing, is actually not often avert lose to tailings that is as important as what you recover. I’ve found how the Wave Table is because they device to examine tailings for lost heavy minerals, including gold. An easy test on your tailings will only take several minutes. Also it observe any heavy mineral lost each morning tailings within a short life span. Such an exam will obviate the depend on for lengthy fire assay complete times.”


The largest model may be the M10 which does up to 8TPH (tonnes per hour) and the M8 model does till 1TPH. The smallest model, the M5, is acceptable for small cleanups of 20 kgs per hour and can be used being a laboratory group.

– Gold wave tables are a great number better for the environment

– Better for workplace safety too

– Never use mercury or cyanide again

– Low water usage

– Efficient and cost-effective.

When an individual might be looking for gold recovery plant for sale, check out


The Wave Table can be used your market smallest to the largest gold mine. They can be utilized for full scale production purposes, or simply as a clean-up or concentration device in the gold location.

The Wave Table is increasingly drank to recover gold from test samples of a couple of kgs in proportion and in place. This form of bulk tests are quick and the quantitative results mean you’re not just relying burning down assays or AAS, specially in visible free gold deposits, even in the event the gold is ultra fine (5 to 20 microns).

Visit to additional information today.

We also can assist you with a Chemical Leaching System, including supplies and training. Contact us for the CLS Manual on Non-Cyanide Leaching.